Fire Alarm System (EN54)

Fire Alarm System (EN54) Wireless Fire Alarm System

Fire alarm control panel

EN54-2&EN54-4 certified by LPCB and Applus.

7.0 inch color touch-sensitive screen LCD, resolution of 800×480.

324 addresses for 1 loop，max 8 loops.

A maximum of 5000 fire protection zones are supported.More user-friendly Night Mode Time Range Settings.

Networkable: CAN bus for interconnection of up to 60 FACPs and Ethernet for up to 254 FACPs.

Fire alarm, fault, C&E and operation, each category can store up to 10000 records.

Power supply
Mains supply	110V/230V AC(-15%,+10%),50Hz/60Hz
Mains fuse	T4A250V
Operating voltage	28V±0.5VDC
Recommended mains cable	Standard/black mains cable, cable size 1mm²
Power rating	Imax.a=3.1A; Imax.b=5.55A; Imin=0.3A
Max. battery supply current	8A(when the Mains is disconnected)
Max. charging current	1A
Physical dimensions	440×590×180mm（for 18Ah Battery) 440x590 x 230mm (for 24AH or 38Ah)
Max. internal resistance of battery	1Ω
Approx.weight(without battery)	SEC3008(Standard):11Kg；SEC3008(Deep):13Kg
Battery fuse	15A
Quiescent current (full loaded)	<0.3A
Outputs
S.C.Out (+, -)	Output voltage	20~28V DC
	Max. output current	1A
	End of line resistor	10KΩ
	Cable diameter	1mm² ~ 2.5mm²
F.A. Out (+, -）	Output voltage	20~30V DC
	Max. output current	50mA
	End of line resistor	10KΩ
	Cable diameter	1mm² ~ 2.5mm²
Fault Out(NC, COM, NO)	Contact capacity	2A@24V DC
Fault Out(NC, COM, NO)	Cable diameter	1mm² ~ 2.5mm²
AUX 24V (+, -)	Output voltage	20~30V DC
	Max. output current	2A
	Cable diameter	1mm² ~ 2.5mm²